Training NDT (Non Destructive Testing) MSS Branch Jakarta
Ruko Pesona Metropolitan Gardenia Residence No RD.06, Jl. Raya Siliwangi (Jl. Raya Narogong) Km.7, Rawalumbu, Bekasi 17116
Telephone / Faxcimile : 021 82731769
Mobile Phone. 08111193778.
Email : firstname.lastname@example.org
Karunia Sukses Teknindois an outside training agency and consulting services.
Karunia Sukses Teknindoprovides consulting, qualification and certification personnel and training (NDT, and etc) for major of sectors including oil and gas, chemical, government. For example, we can augment your technical capabilities for special projects, design cost-effective and reliable NDT procedures. We can also provide objective, thorough, and reliable assessment of procedures, documentation, data, and compliance to specific situation or project
Non Destructive Testing (NDT)
Nondestructive testing (NDT) are noninvasive techniques to determine the integrity of a material, component or structure or quantitatively measure some characteristic of an object. In contrast to destructive testing, NDT is an assessment without doing harm, stress or destroying the test object. The destruction of the test object usually makes destructive testing more costly and it is also inappropriate in many circumstances
Qualification, Training and Certification of NDT Personnel
Personnel Qualification is an important aspect of non-destructive evaluation. NDT techniques rely heavily on human skill and knowledge for the correct assessment and interpretation of test results.
Proper and adequate training and certification of NDT personnel is therefore a must to ensure that the capabilities of the techniques are fully exploited. There are a number of published international and regional standards covering the certification of competence of personnel.
Nondestructive testing personnel are often certified by their employer or other agency to meet certain qualifications, which are established by industry.
Certification is basically a process of providing written testimony that an individual is qualified to do certain work.
The qualifications of an individual are based on education, level of training, work experience, and the ability to pass a vision test.
In the field of NDT, certification is very important because NDT personnel are often making critical judgments that can have safety and/or significant financial consequences.
NDT personnel must have a great deal of confidence in the results of their work. Since many of the NDT methods do not produce a record of the inspection results, certification presents objective evidence of the knowledge and skill level of the individual performing an inspection.
The procedure used to assure that NDT personnel possess the qualifications necessary to do competent work includes:
training to gain the necessary knowledge
experience under the guidance of knowledgeable people
qualification examinations to demonstrate that competency has been achieved
certification to document successful demonstration of competency
NDT training provided by PT.KST
There are several methods of NDT training held by PT.KST, among others:
Dye Penetrant Testing (PT)
Magnetic Particle Testing (MT)
Radiography Testing (RT)
Ultrasonic Test (UT)
Liquid Penetrant Testing (PT)
Liquid Penetrant Testing processes are applicable for the detection of discontinuities, such as cracks, lack of fusion, corrosions, laps, cold shuts, and porosity, that are open or connected to the surface of the component under examination, and applicable to in-process, final, and maintenance (in-service) inspections
Ultrasonic Test (UT).
Ultrasonic Testing are processes are applicable for detection of discontinuitas like Lamination and other discontinuity with position Sub- surface and Inherent of the component under examination, and applicable to in-process, final, and maintanance (in-services) inspections
Radiography Test (RT)
Radiography Test are processes are applicable for detection of discontinuity inside of component to the test like slag inclusion, Incomplete Penetration, Gas Porosity, and etch under examination, and applicable to in-process, final, and maintanance (in-services) inspections
Level 2 personnel are defined as personnel qualified in magnetic particle testing and liquid penetrant testing who will perform and/or direct magnetic particle and liquid penetrant inspection according to established or recognized procedures and shall be responsible for the magnetic particle method or technique to be used, and for the assessment of test results.
Certification training is an essential part of Nondestructive Testing (NDT). This training is required by most construction and inspection specifications in accordance with the international standards recommendations. The course is consisting of classroom instruction, hands-on training session and a three-part final examination.
The course is designed for:
- Personnel with no experience in MT & PT looking to gain understanding of the principles and practices involved.
- Technicians with limited experience in the technique looking to enhance their skills and broaden their understanding of the technique.
- Experienced technicians requiring documented training to satisfy the certification requirements.
- NDT personnel seeking to qualify forSNT-TC-1A standards as well as quality control inspectors, supervisors responsible for NDT procedures/personnel.
This course is intended to provide detailed instruction in the theory and practices of magnetic particle and liquid penetrant testing as required by SNT-TC-1A and reference training syllabus, including the capabilities and limitations of the method. Instruction will be given in generally accepted inspection techniques in accordance with codes and standards.
The Instructor is certified by ASNT NDT Level III & II in PT, and MT methods, and Level II in RT, UT, ET.MT.PT and TIR and Welding Inspector. During his career in NDT, he has conducted examinations in the petrochemical and refining industries, onshore & offshore drilling and production platforms, onshore & offshore pipelines, power plant and manufacturing aerospace components.
Successful Completion Criteria
Attendance to all lectures is mandatory. A final composite average of 80% (minimum) is required for a certificate of successful completion for Levels 2, based on the examination of theory of general and specific and practical a minimum of 70% individual.
Certificate of Attendance
A certificate of attendance will be issued to those meeting the attendance requirements but fail to meet the minimum grade requirements or choose not to write examinations.